Safetots Extra Tall Multi Panel Fire Surround, 77cm Deep x 72cm Wide, 105cm High, Black, Child and Pet Fire Safety, Baby and Toddler Fire Guard, Safety Barrier for Fireplaces, Easy Installation

Product Information

Ideally, you want your stair gate to be at least 75cm (30 inches) in height. Extra-tall models are available, and range in sizes from 1m (39 inches) and beyond. Where to buy a stair gate You don't need to break the bank to get a reliable product either - one of our top models was among the cheapest we tested. We offer stylish wooden dog gates, as well as mesh and metal versions. Should your dog like to chew, a metal dog gate will provide the extra strength and resistance that a wooden dog gate may not. As with standard pressure fit stair gates , a pressure fit dog gate is not installed using tools or drilling and screwing techniques but by applying pressure to the four main pressure points. To fit a pressure fit pet gate, simply place the stair gate in the space you wish to fill then tighten the bottom two spindles followed by the top two spindles. The gap between the wall and stair gate will then gradually close.

Location Stair gates at the top of the stairs should open towards the landing, not towards the flight of stairs, to avoid falling forwards while opening the gate. You should only use screw-fit gates at the top of the stairs.Pressure fit pet gates also feature a trip bar which is perfectly acceptable if installed at the bottom of stairs but could become an additional hazard if fitted at the top. Screw-fit gates are the best type to use at the top of the stairs because they are the most secure and don’t cause a trip hazard.

Yes, we can provide a selection of sizes that are not listed as sizes in each model. We can configure a baby fireguard with any panel sizes you need including 20cm, 28cm, 49cm, 70cm and 90cm panels. This is particularly useful for those who need a fireguard for unsymmetrical fireplaces, circular fireplaces,Aga cookers/ ranges or fireplaces in tight spaces. Get in touch with an expert to discuss. Ensure that the gate opens towards the landing, not outwards towards the stairs, or you could fall forward while opening it.text": "Traditional mesh fire guards such as the Safetots Designer fireguard, with its complete mesh body, will prevent hot, sparking ashes from burning floors and carpets around the hearth. With an encased mesh top, it is an ideal solution for preventing children from throwing items into the fire. These original and more traditional fire guards provide maximum stability and are a great solution for larger fireplaces and hearths. text": "Each manufacturer will place a different recommendation on their instructions regarding this point. There is no set regulation, and Safetots recommend a common-sense approach. Prior to purchasing a fire guard, it is possible to turn your fire up to its maximum heat potential and make a judgement as to which distance from the fire the fire guard should be placed. Dog gates generally come in three materials – wood, metal or plastic – or a combination of plastic and mesh. If your dog is prone to chewing or scratching, it's best to avoid wood, plastic or plastic and mesh gates, and opt for a metal gate instead. If you travel or will be adjusting the gate to different rooms in the house, the best option is a portable, free-standing gate.

text": "A fire guard screen is a non-toxic, heat resistant, steel construction designed to encase any fire, particularly open fires and log burners, to protect businesses, homes, and families from any potential fire-related hazards. Lots of people use safety gates as dog gates for stairs and to keep pets in or out of certain rooms. Some of the most serious injuries in children are heat- and fire-related, and fire guards are strongly advised particularly for families with open log fires and families with log burners."

As with standard pressure fit stair gates, a pressure fit dog gate is not installed using tools or drilling and screwing techniques but by applying pressure to the four main pressure points. To fit a pressure fit pet gate, simply place the stair gate in the space you wish to fill then tighten the bottom two spindles followed by the top two spindles. The gap between the wall and stair gate will then gradually close.