Inability to provide evidence of damage during transportation or images/videos showing the machine's malfunction. The Photon Mono X 6Ks is equipped with the optimised Anycubic LightTurbo matrix light source and with a high-precision optical lens. The combination of these two components creates a stable and uniform light source with parallel light beams. This eliminates optical layers and grid lines, leaving smooth and fine model surfaces. Any faults or damages to the product are caused by unauthorized use or modification, including exposure to moisture, entry of foreign substances (water, oil, sand, etc.), or improper installation or operation. Ultimately, once you learn to work with the resin, keep things clean and work out a logical workflow, there's little that can go wrong. Introducing the Anycubic Photon Mono X: Elevate your 3D printing experience. Enjoy ultra-sharp details with the 8.9" 4K Monochrome LCD. The Matrix UV Light Source ensures rapid and precise prints, while the UV Cooling System enhances longevity. Upgraded design guarantees user-friendly operation. Unleash creativity with Anycubic Photon Mono X.

It's also worth doing this if you leave the resin sat in the vat for more than 24hours. More than 48 hours in the open and I found the resin should be disposed of. Final verdict While small print sizes limit other similar LCD-based SLA 3D printers, the Mono X brings print sizes that we're come to expect from FFF and higher-end SLA printers.

Anycubic Care+

With a print volume of 4.76 litres and a build space of 195.84 x 122.4 x 200 mm, you can afford to print larger models as well as perform multiple prints in one pass. Increased efficiency is guaranteed! The serial number of the defective product and/or visible evidence describing the defect may be required.

Overall the print quality is exceptional, and comparing a print from this against an FFF 3D Printer and the print quality difference is easy to see. Layer markings are far less defined, and you can print much more complex models. When printing transparent or translucent resin, the UV power can be adjusted between 45% and 50% to present better printing results.Then the resin vat is then bolted in place, and it's just a case of following the brief instructions on screen, making sure the build plate is flat and then tightening the screws. You're now ready to print. Within 15 calendar days of receiving the product request a return for an exchange, if the product does not match the original description of the product in one or more significant respects.